Rope Blowing Tees

Designed for the installation of draw ropes into cable ducts. Fits into the outlet of an expanding pipe stopper, either ½” or 1” version available. The draw rope is fed through the rope blowing tee and then braced in the end of the pipe or duct. When pressurised, the rope will be drawn in.

Rope Blowing Tee – requires a mechanical pipe stopper to hold it in place.

High Pressure Rope Blowing Tee – Designed for use at pressures up to 10Bar. The system has an in-built pressure relief valve to prevent over pressurisation.

• ½” or 1” outlets
• Low pressure and high pressure 10bar versions available
• High pressure version has a pressure relief valve.